Synthesis Polymer Matrix Composite Epoxy-FeNdB-Mn for Radar Absorbing Material Application
DOI:
https://doi.org/10.21776/MECHTA.2021.002.01.1Keywords:
Polymer Matrix Composite, Radar Absorber Material, FeNdB, Reflection LossAbstract
In recent years, applications using electromagnetic wave technology have grown rapidly. One of them is in the military field, the wave-absorbing material used to avoid detection such as aircraft, ships, or tanks requires a super thin absorbent material which has extraordinary absorption. One of the criteria for a wave absorbing material is a soft magnet and has a high Reflection Loss (RL). This research aims to see the effect of the addition of FeNdB and Mn on the synthesis of Polymer Matrix Composite (PMC) as a wave-absorbing material.The FeNdB milling process and Mechanical Alloying (MA) with Mn were carried out using a Planetary Ball Mill (PBM) at a speed of 1000 rpm for 60 minutes. synthesis of PMC by varying the composition of epoxy resin with magnetic powder 95: 5; 90:10; 85: 5. Based on the characterization results, the optimum RL was obtained at a composition of 85: 5 with a value of -22.40 dB at a frequency of 10.40 GHz and the magnetic properties after the addition of Mn were obtained HcJ 0.116 kOe and Br 0.41 kG. PMC hardness increased with the increase of powder in the sample with the highest value of 29.2 HD Shore D and the adhesion decreased with the addition of powder in the sample with the lowest value of 1 MPa.
References
AN, Y.J.,et al. “Characteristic Evaluation of Microwafe Absorbers Using Dielectric and Magnetic Composite Materialâ€. Journal od Ceramic Processing Research Vol.9 No.4 pp.430-436. 2011.
I. O. P. C. SERIES and M. SCIENCE, “Effect of Particle Size Distribution on the Preparation of Bonded NdFeB Permanent Magnet Effect of Particle Size Distribution on the Preparation of Bonded NdFeB Permanent Magnet,†pp. 1–7, 2019, doi: 10.1088/1757-899X/622/1/012012.
P. SAVILLE, “Review of Radar Absorbing Materials Defence R & D Canada – Atlantic,†Def. Res. Dev. Canada. January, p. 62, 2005.
MUJAMILAH, et al. Penghalusan Serbuk dan Efeknya Pada Fasa dan Sifat Magnetik Sistem Magnet Permanen Berbasis Nd2Fe14B, Jurnal Sains Materi Indonesia. 7 (2019), pp. 21-24
P. AMBARDI and Y. M. SAIT, “Efek Penambahan Partikel Barium Heksaferrit ( BaFe12O19), Neodybium (NdFeB) dan Grafit (C) terhadap Kemampuan Penyerapan Gelombang Radar pada Cat Berbasis Polyurethane Fr 2 / 55 Top Coat,â€. 2015.
Y. E. GUNANTO, L. CAHYADI, and W. A. ADI, “Effect of Mn and Ti sub s titution on the reflection loss,†vol. 19, pp. 2–8, 2016, doi: 10.1063/1.4945477.
T. KRISTIANTORO, N. SUDRAJAT, and W. BUDIAWAN, “Pembuatan dan Karakterisasi Magnet Bonded NdFeB dengan Teknik Green Compact,†pp. 9–11, 2013.
C. KURNIAWAN and P. SEBAYANG, “PELAPISAN Ni PADA MAGNET BONDED Nd-Fe-B DENGAN METODE,†no. July, 2012.
S. VIRDHIAN, D. H. PRAYITNO, S. JAMILAH, B. BESAR, and K. PERINDUSTRIAN, “NdFeB ALLOYS MAKING FOR PERMANENT MAGNET RAW MATERIALS APPLICATIONS,†vol. 38, no. 2, 2016.
L. LI et al., “Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets,†Nat. Publ. Gr., no. October, pp. 1–7, 2016, doi: 10.1038/srep36212.
RUSTAMAJI, & DJAELANI, E. Radar Jamming Suatu Konsep Rancang Bangun. 2011. Seminar Ra-dar Nasional. ISSN 1979-2921.
SRI BIMO PRATOMO, YONGJIN KIM, DJOKO PRAJITNO. “Effects of Water Quenching Before Hydrogenation,Disproportionation, Desoption and Recombination Process on Magnetic Properties of Nd-Fe-B Powderâ€. 2016. International Journal of Technology. 7(3):471.
ELECTRANS, et al. Ultrasonic Radar Navigation By Using UltrasonicSensor. 2017. Journal of Emerg-ing Technologies and Innovative Research (JETIR), 4(7), 138–140.
C. K. YUZCELIK, D. JENN, and R. ADLER, “Radar Absorbing Material Designâ€. September, 2003.
FADHALLAH, ESA GHANIM, dkk. Protoype Material Penyerap Gelombang Radar dari Komposit Polimer – Polivinil Alkohol. 2012. UT – Aquatic Product Technology [1227].
HALLIDAY, DAVID, et al. Fundamentals of Physics. 1960. United States.
EFAN AHMAD. Polimer. Jurusan Teknik Mesin Universitas Mudamadiyah Jember. 2010. Jember.
D. I. BOWER, An Introduction to Polymer Physics. Cambridge University Press, 2002.
A.F. RIKSON, et al. Polimer: Ilmu Material. USU. USU Press. 2017. Medan, Indonesia.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See the Effect of Open Access).
