COMPARISON OF CHATTER CONTROL OF VARIABLE AND REGULAR HELIX TOOLS IN THE ALUMINUM END-MILLING PROCESS
DOI:
https://doi.org/10.21776/MECHTA.2023.004.01.6Keywords:
Variable-Regular Helix Tools, Chatter, Stability Loop Diagram, End Milling, AluminumAbstract
In the chatter, machining operations are undesirable because of the phenomena that affect product results, machining accuracy, tool life, and high operating value. Chatter is a vibration phenomenon that occurs in cutting tools due to the self-excitation of the influence of cutting parameters during the operation process of the machine. Types of chatter in machinery are regenerative and resonant. Because the pitch angles of variable helix tools vary, the helix angles of variable tools produce different tooth passing frequencies on each tool eye next to each other and can be used to prevent and control resonance. This study aimed to compare chatter control from the variable helix and regular-angle tools in the aluminum end milling process. The method is carried out through the end milling process experiment to determine the chatter control of the variable helix and regular-angle tools through the stability loop diagram. The results from this study were obtained by comparing control chatters in the milling process through controlling variable and standard helix angles as a guideline to produce the best surface roughness in the end milling process made from aluminum. The comparison of estimated control charts from variable helix tools is more comprehensive than regular helix tools.
References
SONIEF., AA., AN FAUZAN, FA, ALAMSYAH., (2019). Evaluation of Aluminum Surface Roughness in the Slot End-Mill Process with Variable Helix Angle, ICOMERA, IOP Publishing, 494 (2019) 012045. http://dx.doi.org/10.1088/1757-899X/494/1/012045
SONIEF, AA., FAUZAN AN., FACHRY AZLAN, MA BASHORI, (2020), Chatter Vibration Comparison Between Normal Helix Angle and Variable Helix Angle in End Milling Process Based on Spectrum Analysis, Rekayasa Mesin, V11 N3, eISSN 2477-6041 article 25, p.531-536. https://doi.org/10.21776/ub.jrm.2020.011.03.25
COMAK ALPTUNC & BUDAK, ERHAN. (2017). Modeling dynamics and stability of varia-ble pitch and helix milling tools for developing a design method to maximize chat-ter stability. Precision Engineering 47 (2017) 459–468. http://dx.doi.org/10.1016/j.precisioneng.2016.09.021
Tools Catalog,
https://www.carbideanddiamondtooling.com/assets/images/Monster/15200.JPG
HARDINSI, FESTO ANDRE, OYONG NOVAREZA, ACHMAD AS'AD SONIEF, (2021), Optimiza-tion Of Variable Helix Angle Parameters In CNC Milling Of Chatter And Surface Roughness Using Taguchi Method, Journal Of Engineering And Management In In-dustrial System 9 (1), e-ISSN 2477-6025, p. 35-44. DOI: 10.21776, https://jemis.ub.ac.id/index.php/jemis/article/view/400/287
MUNOA, JOKIN., BEUDAERT, X., DOMBOVARI, Z., ALTINTAS, Y., BUDAK, E., BRECHER, C., STEPAN, G. (2016). Chatter Suppression Techniques in Metal Cutting. CIRP Annals - Manufacturing Technology 65 (2016) 785-808. http://dx.doi.org/10.1016/j.cirp.2016.06.004
NIU, JINBO., DING, Y., ZHU, L. & DING, H. (2017). Mechanics and multi-regenerative stability of variable pitch and variable helix milling tools considering runout. Inter-national Journal of Machine Tools and Manufacture 123:129-145. https://doi.org/10.1016/j.ijmachtools.2017.08.006
SONG, QINGHUA., JU, G., LIU, Z. & AI, X. (2014). Subdivision of chatter-free regions and optimal cutting parameters based on vibration frequencies for peripheral milling process. International Journal of Mechanical Sciences. 83:172-183. https://doi.org/10.1016/j.ijmecsci.2014.04.002
WAN, MIN., FENG, J., ZHANG, W., YANG, YUN., & MA, Y. (2017) Working mechanism of helix angle on peak cutting forces together with its design theory for peripheral milling tools. Journal of Materials Processing Tech. 249:570-580. https://doi.org/10.1016/j.jmatprotec.2017.06.030
WANG, YONG., WANG, T., YU, Z., ZHANG, Y., WANG, Y. & LIU, H. (2015). Chatter Pre-diction for Variable Pitch and Variable Helix Milling. Hindawi Shock and Vibra-tion. 2015:1-9. http://dx.doi.org/10.1155/2015/419172
YUSOFF, AHMAD R. & SIMS, NEIL D. (2011). Optimization of variable helix tool ge-ometry for regenerative chatter mitigation. International Journal of Machine Tools and Manufacture. 51(2):133-141. https://doi.org/10.1016/j.ijmachtools.2010.10.004
YUE CAIXU, HAINING GAO, XIANLI LIU, STEVEN Y. LIANG, LIHUI WANG (2019). A review of chatter vibration research in milling. CSAA Chinese Journal of Aeronautics. 32(2): 215–242. https://doi.org/10.1016/j.cja.2018.11.007
Downloads
Published
Issue
Section
License
Copyright (c) 2023 Achmad As’ad Sonief, Moch. Syamsul Ma'arif, Pratikto Pratikto, Hans Juliano
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See the Effect of Open Access).
